Water LabThe Hydraulics and Fluid Mechanics Laboratory is used in Civil Engineering fluid mechanics and water resources classes. The lab is designed to give students hands-on experience with fluid flows in Civil Engineering.

Water is supplied to various experiments by a large storage tank under the floor of the lab. A Goulds 3796 self-priming pump, capable of producing 1000 gallons per minute of flow at a head of 80 ft, pumps water into a pipe system, past a flow meter, and distributes it to the equipment in the lab. A system of channels is built into the floor of the lab to return water to the storage tank.

Experimental Apparatus:

  1. One 32 ft by 4 ft open channel flume, capable of simulating open channel flows, sediment transport, flow through flood plains, and unsteady flow over weirs.
  2. One 16 ft by 1 ft open channel flume, suitable for studying steady-uniform flow, gradually-varying water surface profiles, and rapidly-varying flows such as hydraulic jumps.
  3. A weir box for studying flow over weirs of various shapes.
  4. A subsonic wind tunnel
  5. Various measurement devices, including hot-wire and hot-film anemometers.

Additional equipment is located outside the laboratory, including:

  1. An air flow apparatus to measure head losses for flow through plastic pipes, velocity profiles across a pipe, and flow through a venturi.
  2. A pipe network to measure head losses through individual pipes, pipes in parallel, and pipes in series.
  3. A testing apparatus to develop characteristic curves for pumps and turbines.



Places I've Been

The following links are virtual breadcrumbs marking the 27 most recent pages you have visited in Bucknell.edu. If you want to remember a specific page forever click the pin in the top right corner and we will be sure not to replace it. Close this message.